Indoor LED Screen Common Glossary
Nits
Nits are a unit of brightness; It indicates how much light the LED panel emits per square meter. If you plan to use the screen in direct sunlight or high-end applications, you can ask the manufacturer to set the brightness between 800 and 2,000 nits.
Contrast Ratio
For indoor LED displays, the high contrast ratio produces deeper blacks and richer detail; this also makes the display look more premium. If you desire an indoor LED display with excellent color performance, you can choose a contrast ratio of 5000:1 or higher.
Low Brightness and High Grayscale
Low brightness and high grayscale means that the screen can still keep rich grayscale levels at low brightness. If your LED display often runs at low brightness, you should pay more attention to its grayscale performance. 16-bit usually provides good detail. If you have higher requirements, you can choose 18-bit or 20-bit.
Refresh Rate
For LED displays, a high refresh rate can reduce motion blur and scan lines. Especially when you film it, it helps keep the image stable. If you want better display performance, a refresh rate of 3840Hz or higher is necessary. For high-end applications, you can also choose the more stable 7680 Hz refresh rate.
Dead Pixel Rate
Dead pixels include dead points, bright pixels, and dim pixels. The dead pixel rate means the percentage of pixels that cannot light up properly out of the total number of pixels on the screen. This value is usually expressed in PPM.
A qualified indoor LED display usually has a factory dead pixel rate of less than 10 PPM. You should check this carefully when you receive the product.
All The Details You Should Consider When Customizing An Indoor LED Screen
Understanding Your Space & Environment
Different environments have different performance requirements for LED screens. If you choose the wrong specifications, the screen may not perform as expected. Once you have confirmed the installation location, you can focus on recording details such as viewing distance, ambient light, temperature and humidity, wall structure, floor load capacity, and foot traffic.
Defining Your Content & Usage Requirements
Next, confirm the type of content the screen is expected to display, such as videos, text, data visualizations, or interactive content. Also consider whether you need multi-screen synchronization or whether the screen will be used for photography or video recording. These factors determine the control system, refresh rate, and other specifications you need.
Technical Specifications You Must Lock Down
Before customization, it is best for you to make a list of the technical specifications you need, including refresh rate, brightness, grayscale, color temperature uniformity, dead pixel standards, cooling design, and IP rating. This can help avoid repeated confirmations and save time later.
How To Allocate The Budget For An Indoor LED Screen?
Budget Breakdown Of An LED Screen
The main factors that affect an LED screen’s price include pixel pitch, size, cabinet type, and installation method. Besides these, the maintenance, operating, and content production costs are also often overlooked. You need to consider all these factors when calculating the total cost.
How To Allocate The Budget For Each Item Properly
First, choose the right pixel pitch; it is one of the biggest factors affecting the price. The smaller the pixel pitch, the higher the screen cost. Don’t spend too much of your budget on a pixel pitch that is too small. You can calculate the minimum pixel pitch based on the viewing distance to avoid overinvesting.
Next, consider the cabinet. Unless you have special requirements, we recommend choosing standard modular cabinets instead of custom-shaped cabinets. In terms of cabinet material, die-cast aluminum cabinets cost more than steel cabinets, but they are lighter. If you don’t need to move the screen frequently, standard steel cabinets are sufficient.
Installation can also bring high hidden costs. The typical cost ranking is: suspended LED screens > wall-mounted LED screens > recessed LED screens > mobile LED screens. You can choose the option that best suits your venue.
SMD, COB, GOB, And Micro LED Packaging For Indoor LED Screens
The packaging technology affects an LED screen’s image clarity, protection, serviceability, and long-term stability. Different packaging technologies can make a big difference in LED screens, so you need to choose the right one.
SMD Packaging for Indoor LED Screens
SMD means that LEDs being soldered directly onto the surface of a PCB. It is now the most widely used packaging method for indoor LED screens. The technology is well established, so it also has a lower cost.
At the same time, it has good brightness and color performance. If you have a limited budget and do not need high performance, SMD is undoubtedly an ideal choice.
COB Packaging for Indoor LED Screens
COB refers to directly packaging LED chips on a PCB substrate and then covering them with epoxy resin or silicone. It has no separate housing, so it has better protection and color performance than SMD. It can also achieve higher image clarity.
If you plan to use an LED screen in a high-end retail space, or you want outstanding display performance, a COB LED screen may be a great choice.
GOB Packaging for Indoor LED Screens
GOB means adding a layer of transparent protective coating over the surface of an SMD module. Compared with SMD, it has better resistance to moisture and impact. GOB LED modules cost slightly more than SMD modules but are still less expensive than COB.
If your LED screen will be installed in a place that people may touch it, like a shopping mall or showroom, GOB can significantly extend its service life.
Micro LED Indoor LED Screens
Micro LED is a high-cost packaging technology that offers excellent image clarity and color performance. For high-end cinemas, studios, and other applications that need an ultra-high display performance, you can consider Micro LED display. In other cases, the return on investment (ROI) may be very low.
Front Maintenance And Rear Maintenance Structure Design Of Indoor LED Screens
The operating modes of front-service and rear-service LED screens are completely different. Their maintenance efficiency, appearance, and long-term operating costs are completely different. You need to make the right choice between the two:
Front Maintenance Indoor LED Screens
Front service means the screen has a structure on the front that supports quick removal. You can install, remove, and service the modules, power supplies, and receiving cards from the front. Its cabinets are thinner and support wall-mounted installation. Also, the front-service LED screens look cleaner and more attractive.
If your LED screen will be installed in places where the rear is inaccessible, like shopping mall atriums, elevator halls, and corridors, front service is definitely the better choice.
Rear Maintenance Indoor LED Screens
Rear service means the cabinet has a removable back cover. You need to conduct maintenance from the back of the screen.
The rear-service LED screens usually need at least 80 cm of clearance behind the screen for maintenance. This means you cannot install the screen directly against the wall. However, this also means that the screen has sufficient space for heat dissipation.
Rear-service LED modules are usually less expensive than front-service modules. If your screen is very large or needs to run at high brightness for long periods, rear service is actually a good choice.
Routine Maintenance Schedule And Inspection Checklist For Indoor LED Screens
Factors That Determine Your Maintenance Frequency
How often you need to perform maintenance depends on the operating environment, usage time, and screen type. If your screen runs 24/7 or is placed in a high-traffic area, you should clean and maintain it more often.
For example, an LED screen display that runs for 8 hours a day under normal conditions should be cleaned once a month, while a screen that runs 24/7 should be cleaned every two weeks.
Daily Inspection Checklist for Indoor LED Screens
Daily inspections you need to do mainly involve visual checks and simple functional tests. You can check the screen for image distortion, the status of the power indicator, abnormal temperatures, and any unusual noise or odors; Also, you only need to record the basic operating conditions. There is no need to record detailed technical data.
Monthly & Quarterly Inspection Checklist for Indoor LED Screens
Monthly inspections include cleaning the screen surface, checking whether the modules are loose, and checking whether the ventilation openings are blocked.
In addition, you can arrange for a professional to perform a more thorough functional test once every quarter. After powering off the screen, open the cabinet and check whether the internal fans are working properly, whether the power modules are swollen, the status of the receiving card indicators, and whether the grounding is secure.
Annual & Semi-Annual Tasks
You’d better carry out a thorough maintenance service every six or twelve months; this should be done by a professional engineer or the manufacturer’s service team.
Thorough maintenance includes brightness and color calibration, cooling system maintenance, and electrical safety testing; this can greatly help extend the lifespan of the LED screens.
Indoor LED Screen Certifications and Compliance
Certifications affect product safety and how smoothly the product clears customs. The products that fail to meet the compliance requirements may be held by customs or fail project acceptance. For an indoor LED screen, you need to pay attention to the following certifications:
Core Safety Certifications for Indoor LED Screens
Safety certification is a basic requirement for indoor LED screens. In Europe, the screen should comply with the CE requirements for the LVD (Low Voltage Directive) and EMC Directive. In North America, it should meet UL 60950-1 / UL 62368-1 requirements. In China, CCC certification is required.
Electromagnetic Compatibility (EMC) Compliance
Indoor LED screens generate electromagnetic interference during operation, so they must pass EMC testing to ensure that they do not interfere with other devices. Common standards include EN 55032 / EN 55035 in Europe, FCC Part 15 in the United States, and ICES-003 in Canada.
Environmental and Hazardous Substance Regulations
Environmental compliance is a necessary requirement for entering most developed markets. The EU has some of the strictest environmental regulations. Products need to comply with RoHS, REACH, and WEEE requirements.
Other environmental regulations include California Proposition 65 in the United States and K-RoHS in South Korea. You should check the requirements in advance.
Fire Safety and Flammability Standards
According to UL 94 requirements, the plastic materials used in LED screens need to meet a flame-retardant rating of V-0, V-1, or HB, which are widely used internationally.
In Europe, building materials may also need to meet EN 13501 or BS 476 requirements, while electrical installations in the U.S. are subject to NFPA 70 / NEC requirements. If you need to install the LED screens in large shopping malls or transportation hubs, you may also need to provide a fire safety test report for the entire screen.











































